ALLSTYLES glass mosaic tile installation

Pool tilers will tell you that Installation of glass mosaic can prove to be a challenge when using inferior products in swimming pool tiling. This is because in many cases, the mosaic tiles in concrete pools require extra care and attention to be made to look presentable to the eye. In many cases in the past, the mounting system failed and this can lead to ongoing maintenance issues in the future.

Top 3 reasons installers prefer ALLSTYLES glass mosaics:

  1. ALLSTYLES glass mosaics are compatible with any adhesive suitable for swimming pool application.
  1. Grouting is a breeze with these pool tiles and sits evenly and deeply between the tiles.
  1. All the mosaic tiles are straight and aligned – so no need to cut out crooked chips any more to reposition them.

Hotmelt glass mosaics are easy to handle and cut, and with no sharp edges they line up perfectly in corners and joints allowing the installer to do their best work.

Installation Steps

step 1

step 1

Spread the adhesive (toothed trowel 2-3mm). It is recommended to use specific adhesives for laying tiles with no porosity at all.

step 2

step 2

Application of the sheets. Adjust and place the sheets on the base spread with glue cement.

step 3

step 3

Tap the sheets (rubber trowel)

step 4

step 4

Fill the joint with a specific product using a rubber trowel.

step 5

step 5

Clean with a damp sponge and rinse it.

step 6

step 6

Clean the surface with a dry cloth.